Sign in to confirm you’re not a bot
This helps protect our community. Learn more

Guide: How to change GPUs in the Comino Grando RM-M

Comino
2.37K subscribers
<__slot-el>
<__slot-el>
309 views 3 years ago
Hi guys! Check out our video guide on how to change GPUs in the Grando RM-M by Comino. Here are the timecodes for your convenience: 0:00 Intro 0:06 Turn the system off, unplug it from the power sockets, and let it stay like that for a minute, to depower the PSUs completely 0:12 Removing the cover Unscrew 2 screws (use PH2 screwdriver) from the top 0:30 Unscrew 3 screws (use HEX2 screwdriver) from the radiator side 0:47 Remove the top cover by sliding it sideways 0:53 Unscrew the top bracket holding the GPU (use HEX2 screwdriver) 1:20 Remove 2 screws (use PH2 screwdriver) on each side of the case like shown 1:54 Remove the crossbar by rotating it clockwise, in the horizontal plane, as shown 2:00 Disconnect the QDC by pushing it down and turning the lock-sleeve 2:08 Unplug a 6-pin PCI-E connector from the GPU 2:13 Remove the GPU bracket cover by unscrewing it 2:21 Unscrew and take the GPU out of the case by pulling it up 2:33 …...more
...more

Intro

0:00

Turn the system off, unplug it from the power sockets, and let it stay like that for a minute, to depower the PSUs completely

0:06

Removing the cover

0:12

Unscrew 3 screws (use HEX2 screwdriver) from the radiator side

0:30

Remove the top cover by sliding it sideways

0:47

Unscrew the top bracket holding the GPU (use HEX2 screwdriver)

0:53

Remove 2 screws (use PH2 screwdriver) on each side of the case like shown

1:20

Remove the crossbar by rotating it clockwise, in the horizontal plane, as shown

1:54

Disconnect the QDC by pushing it down and turning the lock-sleeve

2:00

Unplug a 6-pin PCI-E connector from the GPU

2:08

Remove the GPU bracket cover by unscrewing it

2:13

Unscrew and take the GPU out of the case by pulling it up

2:21

Plugging the card in PCI-E slot

2:33

Insert the NEW GPU into the PCI-E slot. Mind the bracket tail, not to puncture the motherboard!

2:39

Use 2 hex screws (use HEX2 screwdriver) to tie the GPU bracket to the case

2:47

Put the GPU bracket cover back on

2:52

The example of proper Comino’s QDCs coupling

3:03

Attach the PCI-E power connector

3:13

Fit quick couplings to their respective places

3:17

Install the crossbar back into the case by rotating it in counterclockwise direction

3:35

Fasten 2 screws (use PH2 screwdriver) on both sides of the case

3:44

Install the top GPU bracket back like shown

4:16

Put the case cover back

5:17

Fasten 2 upper screws (use PH2 screwdriver)

5:24

Fasten screws (use HEX2 screwdriver) from the radiator side

5:42
Guide: How to change GPUs in the Comino Grando RM-M
5Likes
309Views
2022Mar 21
Hi guys! Check out our video guide on how to change GPUs in the Grando RM-M by Comino. Here are the timecodes for your convenience: 0:00 Intro 0:06 Turn the system off, unplug it from the power sockets, and let it stay like that for a minute, to depower the PSUs completely 0:12 Removing the cover Unscrew 2 screws (use PH2 screwdriver) from the top 0:30 Unscrew 3 screws (use HEX2 screwdriver) from the radiator side 0:47 Remove the top cover by sliding it sideways 0:53 Unscrew the top bracket holding the GPU (use HEX2 screwdriver) 1:20 Remove 2 screws (use PH2 screwdriver) on each side of the case like shown 1:54 Remove the crossbar by rotating it clockwise, in the horizontal plane, as shown 2:00 Disconnect the QDC by pushing it down and turning the lock-sleeve 2:08 Unplug a 6-pin PCI-E connector from the GPU 2:13 Remove the GPU bracket cover by unscrewing it 2:21 Unscrew and take the GPU out of the case by pulling it up 2:33 Plugging the card in PCI-E slot 2:39 Insert the NEW GPU into the PCI-E slot. Mind the bracket tail, not to puncture the motherboard! 2:47 Use 2 hex screws (use HEX2 screwdriver) to tie the GPU bracket to the case • Screw the fastener all the way 2:52 Put the GPU bracket cover back on 3:03 The example of proper Comino’s QDCs coupling 3:13 Attach the PCI-E power connector 3:17 Fit quick couplings to their respective places: • Red to red • Blue to blue • Hold them straight • Push and rotate directing nut to match the nipple 3:35 Install the crossbar back into the case by rotating it in counterclockwise direction 3:44 Fasten 2 screws (use PH2 screwdriver) on both sides of the case 4:16 Install the top GPU bracket back like shown Fasten the GPU-holding top bracket with 4 screws (use HEX2 screwdriver) 5:17 Put the case cover back 5:24 Fasten 2 upper screws (use PH2 screwdriver) 5:42 Fasten screws (use HEX2 screwdriver) from the radiator side Subscribe to our channel, leave comments and like if this video was useful for you. Thanks for supporting us ♥️ 🔹 FB:   / cominotech   🔹 Instagram:   / cominotech   🔹 Twitter:   / cominotech   🔹 LinkedInn:   / cominotech  

Comino

2.37K subscribers